Frequently Asked Questions

The most common questions and some that are not so common.

Q: [What Wheelchair will Surelock Hub Locks fit on?]
A: [Surelock Wheelchair Hub Locks can be used on most any wheelchair, for those with a real question about fitting them successfully, those are usually shipped to the factory here and we design the hub-locks for that particular chair.]

---

Q: [Will Surelock Hub Locks fit with the Round Betty Wheel?]
A: [Yes you can  see the design in the photo gallery page]

Q: [Will Surelock Hub Locks fit the 9 point star Hub that is made by       Rogue]

A:  [Very Nice Fit-Easy to install & lighter than others.

Q:  Will Surelock Hub Locks fit the Quickie Q7

Answer:  Yes we have production going on the Quickie Q7 chair see photos under NEWS tab

Q:  Will Surelock Fit TiLite ZR2

Answer:  Yes see photos under NEWS tab.

Surelock's Lock 'n' Roll wheelchair hub locking hub systems are today's answer to unreliable and frequently unsafe Push-Pull and Scissor brakes. . . yesterday's technology.

For decades, conventional manual wheelchair brakes have relied on mechanical pressure applied to the tire. This pressure steadily squeezes out the air the in the tires. As tire pressure drops the brakes lose their grip and chair slippage becomes an issue putting the user at increase risk for injury.

Surelock developed the Lock 'n' Roll to provide secure and consistent wheelchair locking.  Surelock uses a positive locking mechanism that secures the wheelchair at the hub, not the tire. The result? A wheelchair that locks firmly and securely every time.

Does your Hublocking system adjust for Camber Angle?


yes

the first name in wheelchair locking hubs